SL007 Preservative CAS:78491-02-8_55406-53-6

SL007 Preservative

SL007 Preservative is Equivalent to Liquid Germall Plus Preservative
 
SL007 Preservative is a highly efficient, broad spectrum antimicrobial for a wide variety of personal care formulations. It's compatible with many other cosmetic ingredients. SL007 Preservative is a highly effective, broad spectrum preservative for emulsions and aqueous formulations. It can be incorporated into a variety of leave-on and rinse-off cosmetic and personal care formulations for broad preservation.
 
SL007 Preservative provides efficient antimicrobial power to a wide variety of personal care products. including emulsions and aqueous formulations.  Its balanced, synergistic broad-spectrum protection is compatible with most cosmetic ingredients. It is effective at low doses and can be used to bolster other preservatives.
 
With no known chemical inactivators, SL007 Preservative is comptible with virtually all cosmetic ingredients including anionic, non-ionic and cationic surfactants and proteins, allowing it to be used in  leave on and rinse off cosmetic and personal care formulations.  Use confidently in water in oil and oil in water emulsions
Add to your product when it is below 50ºC
 
Due to the pH constraints this product is not suitable for saponified liquid soap products (surfactant based hand/body wash is fine though)
 
INCI: Propylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate
CAS#s: 57-55-6, 78491-02-8, 55406-53-6
Usage Rate: 0.1% up to 0.5%
Broad Spectrum: Yes
pH: 3 – 8
 
This product is suitable for vegan compliant product manufacture.
 
Restrictions:
 
US and Japan:
Not for use in aerosols
Approved for use in creams and lotions
Approved for use in rinse off products
 
European Union (EU):
Not for oral hygiene and lip care products
Not to be used in products for children under 3 years old, except in bath products/shower gels and shampoos
Not to be used in body lotion and body cream



We are professional Liquid Germall Plus Preservative manufacturer and Germall Plus Preservative supplier in China, We offer quality LIQUID GERMALL PLUS you can fully trust, also we have India factory and producer of Germall Plus Preservative,Pls send inquiry of Liquid Germall Plus Preservative CAS:78491-02-8_55406-53-6 to info@nbinno.com if you have any interests, thank you!


Related News: In the US, avalglucosidase alfa saw its PDUFA date pushed back by three months, from May 18 to Aug. 18, according to a Sanofi investor presentation in April.tricarbonyl(3-ethoxy-5-phenyl-1-oxapentatriene)iron(0) manufacturer EMA said the drug can help improve the respiratory function of Pompe disease patients, and the most common side effects include hypersensitivity (including anaphylaxis) and infusion-associated reactions. L-Ascorbic acid,3-O-[3-[[[[(1,1-dimethylethoxy)carbonyl]amino]methyl]dimethylsilyl]propyl]- supplier Grégoire holds a Masters’ degree in Fundamental Physics from Pierre and Marie Curie University. Carbonic acid, ethyl (1R)-1-phenylethyl ester manufacturer The FDA in announcing its approval noted that four, 12-week placebo-controlled clinical studies that included a total of 1,143 participants showed Nourianz offered a statistically significant decrease from baseline in daily “off” time compared to those on placebo.

O-phosphoethanolamine CAS:1071-23-4

O-phosphoethanolamine

Synonyms:
2-aminoethyl dihydrogen phosphate
O-Phosphorylethanolamine
O-Phosphoethanolamine
 
Molecular Formula: C2H8NO4P
Molecular weight: 141.06300
 
 
Density: 1.554g/cm3
Boiling point: 335.8ºC at 760mmHg
Melting point: 241-243 °C(lit.)
Flash point: 156.9ºC
 
Storage conditions: -20ºC

Items of Analysis Standard of Analysis Test Results
Appearance White powder Conform
Assay ≥98.0% 99.13%
Conclusion Conforms to Factory Standard
 




We are professional O-phosphoethanolamine manufacturer and O-Phosphoethanolamine supplier in China, We offer quality O-Phosphorylethanolamine you can fully trust, also we have India factory and producer of O-Phosphorylethanolamine,Pls send inquiry of O-Phosphorylethanolamine CAS:1071-23-4 to info@nbinno.com if you have any interests, thank you!


Related News: Exploring biocatalysis options at the start of a project is a pragmatic operational strategy to achieve the right product, at the right quality, with exceptional efficiency. L-Glutamine, L-phenylalanyl-L-threonylglycyl-L-tyrosyl-L-leucyl- manufacturer Biogen hiked its revenue guidance for the year, saying it expects total sales of $10.65 billion to $10.85 billion this year. That’s up from its previous estimates of $10.45 billion to $10.75 billion. The new forecast assumes “modest” revenue from Aduhelm in 2021, ramping up thereafter, the company said. 1,3-Benzenedimethanol, 2,5-dibromo-4,6-dimethyl- supplier With the chemical industry being one of the most polluting, global efforts are heavily focused on developing a more sustainable and greener footprint. tert-butyl (S)-(1-((6-(([1,1′-biphenyl]-4-ylmethyl)amino)-9-isopropyl-9H-purin-2-yl)amino)propan-2-yl)carbamate manufacturer The BetterUp experience, which currently consists of one-to-one coaching, counseling, mentorship, group sessions, and interactive content – was built by a team of the world’s leading PhDs and scientists and science advisors including Adam Grant, Martin Seligman, Shawn Achor, Josh Bersin, Robin Ely, and Quinetta Roberson.

ferrous oxide CAS:1345-25-1

ferrous oxide

Synonyms:
Iron monooxide
Natural wuestite
Iron monoxide
oxoiron
FERROUS OXIDE
 
Molecular Formula: FeO
Molecular weight: 71.84440
 
Appearance and properties: solid
Density: 5.7 g/mL at 25ºC(lit.)
Melting point: 1369ºC
 
Stability: Stable. Incompatible with strong oxidizing agents. Highly flammable.
Uses: Ferrous oxide can be used as a pigment and is used in cosmetics and tattoo inks. Ferrous oxide is also used in porcelain making to make the glaze green.

 
Items of Analysis Standard of Analysis Test Results
Appearance Brown to black crystal or powder Conform
Assay ≥85.0% 85.5%
Water ≤1.0% 0.6%
C ≤0.8% 0.6%
S ≤0.06% 0.04%
P ≤0.05% 0.03%
Si ≤1.0% 0.8%
Conclusion Conforms to Factory Standard
 




We are professional ferrous oxide manufacturer and FERROUS OXIDE supplier in China, We offer quality ferrous oxide you can fully trust, also we have India factory and producer of Natural wuestite,Pls send inquiry of oxoiron CAS:1345-25-1 to info@nbinno.com if you have any interests, thank you!


Related News: Italian medical packaging firm Stevanato Group went public on the Big Board on July 16, raising $672 million and helping push up the fortune of the billionaire Stevanato family behind the company. 1-((3S,5S,10S,13S,16R,17S)-3-Hydroxy-10,13,16,17-tetramethyl-2,3,4,5,6,7,8,10,12,13,14,15,16,17-tetradecahydro-1H-cyclopenta[a]phenanthren-17-yl)-propenone manufacturer Earlier this month, the drugmaker lifted a voluntary EU marketing hold on Zynteglo for beta thalassemia, after a patient death in one of the drugmaker’s other products, LentiGlobin, halted clinical studies. 9-Octadecen-1-ol, 12-fluoro-, (Z)- supplier And finally, CHMP also concluded its investigation into bluebird bio’s Zynteglo, finding no evidence that it causes a blood cancer known as acute myeloid leukemia. 1-tetraoxidaneyl-14,23,44,54,63,73,83,94-pentaoxolo[1,5]hexaoxin-5-ol compound with hydrogen peroxide (1:1) manufacturer In the US, however, ODAC in April voted to keep alive the accelerated approval for Tecentriq plus Abraxane (nab-paclitaxel) in mTNBC while additional confirmatory trials are ongoing.

CALCIUM RESINATE CAS:9007-13-0

CALCIUM RESINATE

Synonyms:
CALCIUM RESINATE
 
Molecular Formula: C40H58CaO4
Molecular weight: 642.96400
 
Appearance and properties: yellow-brown-white powder
Boiling point: 439.5ºC at 760 mmHg
Flash point: 208.1ºC

Items of Analysis Standard of Analysis Test Results
Appearance Transparent solid Conform
Color (Fe-Co) ≤11 10
Acid (mgKOH/g) ≤100 92
Softening Point ( ℃) ≥100 132
Conclusion Conforms to Factory Standard
 

 
 



We are professional CALCIUM RESINATE manufacturer and CALCIUM RESINATE supplier in China, We offer quality CALCIUM RESINATE you can fully trust, also we have India factory and producer of CALCIUM RESINATE,Pls send inquiry of CALCIUM RESINATE CAS:9007-13-0 to info@nbinno.com if you have any interests, thank you!


Related News: The Japanese drugmaker is injecting $126 million into its Thousand Oaks facility to boost manufacturing and support new product lines, Pacific Coast Business Times first reported. Takeda was joined by the city’s mayor, Claudia Bill-de la Peña, for a groundbreaking event on Thursday, July 22.N-(2,2-diphenylvinyl)-2,2-diphenyl-N,N’-di-p-tolylethene-1,1-diamine manufacturer After recently opening one cell therapy plant and breaking ground on another in Massachusetts, Takeda is pivoting westward to beef up production in California. [2-(1,1-Dioxo-1,3-dihydro-1λ6-benzo[d]isothiazol-2-yl)-ethyl]-diethyl-amine; compound with (Z)-but-2-enedioic acid supplier AstraZeneca’s Chinese business pulled in sales of $1.53 billion in the second quarter after a 12% year-over-year growth at constant currencies. But problems are showing. rel-3-(3-((2R,5R)-5-(4-fluorophenyl)-1-tosylpyrrolidin-2-yl)propyl)-1-methyl-1H-1,2,4-triazole manufacturer As currently constituted, Vanamali employs roughly 140 works in Hyderabad, Telangana, that specialize in API starting materials and contract research, according to its website. Wavelength said the Indian firm currently sports enough capacity for research- to commercial-scale production of its drug intermediates.

Ammonium molybdate CAS:13106-76-8

Ammonium molybdate

Synonyms:
Ammonium orthomolybdate Diammonium molybdate
Ammonium Molybdate (Metals Basis)
AMMONIUM MOLYBDATE
 
Molecular Formula: H8MoN2O4
Molecular weight: 196.03500
 
Appearance and properties: white powder
Density: 2.498
Melting point: 170 (decomposition) ºC
 
Storage conditions: ventilated, low temperature and dry warehouse

use:
1. It is an important reagent for the determination of phosphorus and the best material for the production of acrylonitrile catalyst
2. Used in the production of molybdenum wire and other molybdenum compounds, also used in photography, ceramics, pigments, catalysts, etc.
3. Used as a catalyst in the petrochemical industry, and used in the metallurgical industry to make molybdenum powder, molybdenum bars, molybdenum wires, molybdenum billets, molybdenum flakes, etc., and also as trace element fertilizers
4. Used as an analytical reagent and also used in the preparation of pottery glaze
5. Used as a flame retardant for pigments, lakes and fabrics, it is the main raw material for the preparation of molybdenum products, and it is also an important agricultural fertilizer
6. It is used as raw material for powder metallurgy, high-purity molybdenum trioxide and other molybdenum chemicals.
7. It is an important reagent for phosphorus determination. Used in the production of hydrogenation, desulfurization and other petroleum refining catalysts, fertilizer catalysts, etc.

Items of Analysis Standard of Analysis Test Results
Appearance White or light yellow crystalline powder Conform
(NH4)2Mo4O13.2H2O ≥99.0% 99.21%
MoO3 ≥84.0% 84.22%
Mo ≥56% 56.36%
Si ≤0.0006% 0.0006%
Mg ≤0.0006% 0.0006%
K ≤0.01% 0.009%
Pb ≤0.0006% 0.0006%
Ni ≤0.0003% 0.0003%
Ca ≤0.0008% 0.0008%
Cu ≤0.0003% 0.0003%
Al ≤0.0006% 0.0006%
Fe ≤0.0006% 0.0006%
Na ≤0.001% 0.001%
Mn ≤0.0003% 0.0003%
Conclusion Conforms to Factory Standard
 

 



We are professional Ammonium molybdate manufacturer and AMMONIUM MOLYBDATE supplier in China, We offer quality AMMONIUM MOLYBDATE you can fully trust, also we have India factory and producer of AMMONIUM MOLYBDATE,Pls send inquiry of AMMONIUM MOLYBDATE CAS:13106-76-8 to info@nbinno.com if you have any interests, thank you!


Related News: So-called “off” periods occur when a Parkinson’s patient has difficulty moving about and occur when the effect of the last dose of another common Parkinson’s drug, known as levodopa, wears off.3-hydroperoxy-1-(3-hydroxy-24,34-tetraoxidan-2-enyl)-13,33-pentaoxolane manufacturer We are committed to bringing safe, effective vaccines to Ireland and other markets as quickly as possible, and Charles River will continue to be an important partner in this regard.” L-Lysine, N2-(N-glycyl-D-tyrosyl)- supplier In addition, AstraZeneca is exploring the potential of anifrolumab in a variety of diseases where type I interferon plays a key role, including lupus nephritis, cutaneous lupus erythematosus and myositis. (3aS,3bS,5aS,8aS,8bR,10aS)-5a,10a-Dimethyl-1,6-dioxo-tetradecahydro-dicyclopenta[a,f]naphthalene-3a-carbaldehyde manufacturer Mene Pangalos, executive vice president, BioPharmaceuticals R&D, said: “The data being presented at EULAR add to the growing body of evidence for anifrolumab that demonstrate a compelling clinical profile with the potential to address significant unmet medical needs in this debilitating disease.